Stacker, Shiploader, Hopper, Bucket Wheel Reclaimer Manufacturer
SKE V return belt cleaner installed on the non-working surface of conveyor belt, the main purpose is to remove the attached bulk material on the non-working surface of the belt and discharge materials to both sides.
The v return belt cleaner is mainly used to remove most of residual material attached to the non-working surface of the conveyor belt and discharge materials to both sides. You can apply it in industries of quarrying, mining, port, grain, power, steel, metallurgy, etc.
1. The v return belt cleaner suitable for all belt cleaning under various working conditions.
2. The V return belt cleaner is one of the most widely used cleaners in the cleaning system, the V return belt cleaner installed on the non-working surface of conveyor belt, the main purpose is to remove the attached bulk material on the non-working surface of the belt and discharge materials to both sides.
3. The v return belt cleaner is mainly used to clean the belt with a belt width of 650 ~2200 mm.
4. The blades of V return cleaner is made of polyurethane material, the polyurethane (PU) has good performance of wear resistant, corrosion resistant, anti-hydrolysis, belt friendly, no sticky material and long service life.
| Secondary Belt Cleaner | |
| Blade hardness(Shore A) | 90 |
| Tensile strength | 31 MPA |
| Elongation at break | 4.1 |
| Abrasion | 30/mm2 |
| Density | 1.11g/cm3 |
| Belt Width(mm) | 500, 650, 800, 1000, 1200, 1400, 1600, 1800, 2000, 2200 |
| L | 620, 788, 938, 1138, 1360, 1610, 1810, 2060, 2280, 2470, 2700 |
| L1 | 480, 600, 730, 910, 1160, 1410, 1610, 1844, 2030, 2270, 2500 |
| L2 | 593, 615, 743, 920, 1175, 1419, 1623, 1529, 1560, 1730, 1960 |
| L3 | 400, 600, 700, 900, 1100, 1400, 1600, 1500, 1500, 1700, 1900 |
| α | 60°, 75°, 80° |
