The radial telescopic stacker is a type of radial telescopic conveyor. It can provide a highly efficient stockpiling method for sawdust and wood chips. When you use this telestacker to stockpile sawdust, we are your best choice.
When you use this telestacker to stockpile sawdust and wood chips, the stacking height can be up to 20m, and the stockpiling capacity can range from 0 to 1000m³. It can provide a highly efficient stockpiling method for sawdust and wood chips. Here we list a project information to introduce our telestacker conveyor.
| Table 1 | |
| Materials | Sawdust and Wood Chips |
| Bulk Density | 250kg/m³ |
| Angle of Repose | <45° |
Here we will list one configuration of our past project for stockpiling woodchips. This layout mainly consists of a mobile truck unloader feeder hopper and a radial telestacker. The truck unloader will receive bulk wood chips from dump trucks and fee the stacker. It has increased the stacking ability of our customers stockyards.
| Table 2 | |
| Full Working Length | 48m |
| Belt Width | 800mm |
| Belt Profile Height | 17mm (The cleat height ranges from 15 to 25mm) |
| Max. Stacking Height | <23.6 |
| Drum Diameter | 400mm |
| Radial Angle | <180° |
| Conveying Angle | <30° |
| Piling Capacity | 250m³/h |
| Drive of Stacker | 2 Hydraulic Motor |
| Drive Up/Down | 2 Hydraulic Cylinder |
| Drive for Rotation | 2 Hydraulic Motor |
| Powder/Voltage | ~ |
| Frequency | 50Hz |
| Remote Control | Yes |
| Loader for Transportation | YES |
| Conveyor Cover | Yes |
| Maintenance Platform | Yes |
| The radial telescopic stacker is used in stockpiling sawdust and wood chips. | |
You can see the drawing of wheeled bulk materials reception feeder.
| Table 3 | |
| Min. Loading Height | 1m |
| Max. Loading Width | 4.1m |
| Conveying Angle | 33° |
| Overall Horizontal Length | 18.6m |
| It is used in feeding wood-chips onto surface belt of radial telescopic stacking conveyor. | |
