For a long time in the past, the plow discharger was mainly controlled manually. Since the electric hydraulic cylinder appeared, we can make it more automated.
The plow discharger is a equipment which can help to unload bulk materials from conveyor belts. For a long time in the past, the plow discharger was mainly controlled manually. Since the electric hydraulic cylinder appeared, we can make it more automated.
Here you can learn how to choose an electric hydraulic cylinder. The below data sheet is about a belt conveyor of 800mm. If you want to purchase a set, you can provide all the data of these items.
| What Should You Provide? | |
| Trust/Pull | 1000kgf / 700kgf |
| Hydraulic Rod Stroke | 0-500mm |
| Push / Casting Speed | 45mm/s / 65mm/s |
| Insulation Level | F |
| Explosion Proof | Yes |
| Voltage | 400V/50HZ |
| Power | 1.5KW |
| Switch | Configure travel switch |
| Method | Tilt down push |
| Filtration | 100μm |
| Altitude | Below 1000m |
| Ambient Temperature | -5～+55℃ |
Electric Hydraulic Cylinder for Plow Discharger
