The belt conveyor tail pulley can be take-up pulley, snub pulley, and bend pulley. With pulley lagging material, the lagged tail pulley can protect the steel shell from damage, increase friction with the conveyor belt and dispense water off the pulley. It can be used in industries of mining, quarry, power plant, sand plant, cement, coal, port, steel, etc.
You can get belt conveyor traditional tail pulleys with high abrasion resistant rubber and ceramics covered. The diameter of tail pulley is smaller than driving pulley. It is installed at the tail of belt conveyor to change the direction of conveyor belt.
You can get heavy duty wing pulley, spiral wing pulleys, chevron wing pulleys, herringbone wing pulleys. Wing type tail pulleys are often installed as a method to reduce the risk of belt damage from the entrapment of lumps of material between the belt and the pulley.
|Belt Conveyor Tail Pulley|
|Belt Width||500-2800mm (19-110.2 inch)|
|Pulley Length||500-3200mm (19-125.9 inch)|
|Diameter||200-1800mm (7.8-70.8 inch)|
|Standard||ISO9001:2008, CEMA, DIN, TUV, etc.|
|Working Life||More than 30,000 hours.|
|Surface||Flat Rubber Lagged, Ceramic Lagged, Diamond Rubber Lagged, etc.|
|Main Material||Carbon Steel|
|Length of conveyor Tail pulley depends on the width of conveyor Belt. You can get Tail pulleys with hot vulcanized rubber lagging, plain or grooved, as required by client.|