Pubdate:04-09-2021 Views:1687
Material carry-back is commonly referred to as any excess fugitive material that sticks to the underside of the return belt beyond the discharge point at the head pulley. The material carry-back will causes serious operational problems.
Carry-back on the return belt of conveyor will accumulate underneath and along the belt conveyor. These areas might be walkways and so will create an increased risk to personal safety in the form of slips, trips and falls.
If attempting to remove carry-back manually, most often the carry-back falls and collects in awkward spaces and any manual labour allocated to remove the carry-back is at risk of injury.
The carry-back can increase dust pollution for the environment and create conveyor roller damage and conveyor belt damage.
Carry-back build up on conveyor hardware causes belt mistracking, conveyor belt and structural damage, and is a major cause of material spillage. Fugitive material may bury idlers, conveyor components, or structural supports, requiring expensive clean-up labour and replacement parts.
You may need belt cleaner to clean the materials that stick to the surface of conveyor belt. SKE is a professional manufacturer of belt conveyor, conveyor belt system, stacker conveyor, mobile conveyor, shiploader conveyor, belt cleaner, conveyor rollers, conveyor truss frame, etc.
If you need our machines or complete conveyor system, you can contact us directly.