Pubdate:02-17-2022 Views:1687
The outside diameter of the cylindrical body of a conveyor pulley, without coating.
The outside diameter of a coated pulley (core diameter + 2 times the coating/wrap thickness).
The length of a pulley’s cylindrical body. This area is intended to act as the contact surface for the conveyor belt.
The initial thickness of the tube, pipe, or formed plate that makes up the cylindrical body of the pulley.
The plates welded on the ends of a pulley which act as the medium between the hub and rim.
A change in the shape of the pulley face designed for the purpose of enhancing belt tracking.
The mounting mechanism for the pulley assembly.
The point of connection between the shaft and end disk or pulley wall.
The inner diameter of a pulley at the point where the shaft is inserted
The distance between the center lines of each bearing race in which a pulley is mounted.
The distance between the center line of each hub contact surface.
The capacity of a system or component to perform beyond its expected load.